Our 76mm Mass Airflow Systems have fast become our most popular product for 1986-1993 Mustang V8 applications. Dyno testing and development has provent this package to be the hot item for those looking to maximize the performance on naturally aspirated 5.0L Mustang applications. Featuring the exclusive "TrueFlow" intake pipe, the entire inlet tract from MAF to throttle body retains a full 76mm diameter throughout, unlike other designs that have proven to restrict airflow and hinder system performance. As an added bonus, the cast aluminum TrueFlow pipe comes with a boss cast into it for those wanting to use nitrous oxide without damaging the stock rubber intake hose. Dyno testing on many different naturally aspirated 5.0 Mustangs with 19lb injectors and various levels of modifications has shown a typical power gain of 13-14 rear wheel horsepower and 17 ft/lbs of torque over the stock air meter assembly with the same K&N air filter Comparison between C&L 76mm and competitor's 77mm system Here's what the magazines had to say: "The C&L Meter is clearly the winner in terms of power production. From 3000 rpm right up to 6000 rpm, the motor equipped with the C&L produced more power than the competitor's 77mm." "The fact that the C&L meter was responsible for a gain of roughly 10 lbs-ft across the board (over the competition) was even more impressive. This kind of gain can be felt in the small of your back." "...in my testing, C&L meters seem to be more repeatable." July 2001 Muscle Mustangs & Fast Fords Dyno Test July 2001 Muscle Mustangs & Fast Fords